Lure Coursing
Accessories
Braided Nylon
String
A 100% filament, #24 braided nylon round
seine string with superior abrasion resistance that will not rot, mildew or
unravel. The line is 1/16" in diameter and 250 lb. test. It is sold
in spools of approximately 500 yards. (wt. 3 lbs. /spool)
Orders of 1 to 4 spools..............$29.00/spool
Orders of 5 spools or more........$22.00/spool
Braided Polyester
String
If
you want a line with less stretch than nylon, this is the string
for you! This is a #24 braided polyester string (commonly referred to
as DACRON which in fact is the trade name of DuPont’s
polyester fiber). The reduced stretch gives you almost instant
lure response on long take up or drag style courses. The size and strength of this line
is approximately the same as Injoy’s Nylon String and is
sold in 400 yard spools. (wt. 3 lbs. /spool)
Orders of 1 to 4 spools..............$31.00/spool
Orders of 5 spools or more........$24.00/spool
Lure Tips
A soft vinyl cap used to make lures in a jiffy. The Tips now
have a preformed string hole and are larger in diameter to
accommodate a fatter lure. They are convenient to use, reusable
and safe for the hounds. Sold in Packages of 50..........$19.00
Cooling Fan
The fan unit is used to effectively cool the lure machine
motor. When installed on the motor, the fan will definitely
reduce the cycle time between courses and increase the life of
the motor. The fan is rated for 105 CFM with minimal battery
drain. It has an on/off switch for extended idle periods between
courses. The unit is easily removed and installed when changing
motors. (wt. 7 Lbs.)......$100.00 OUT OF STOCK
Voltmeter
The Voltmeter easily attaches to your lure stand. When
connected to the solenoid, it provides a convenient way to
monitor the voltage coming from your battery. When the voltage
reading drops below 11 volts, it’s time to recharge or
switch your battery.
(wt. 1 lb.).............$20.00
Installation instructions for Voltmeter.
Switch for STD Lure
Machine 
A thumb activated snap action switch with dust and moisture
boot. This is an industrial rated switch and should hold up very
well. Comes complete with 15 ft. cord and a receptacle for
attaching to the solenoid. ..........$34.00
Replacement Switch Only..........$26.00
Solenoid "Odometer"
This is a 12 volt mechanical counter to be attached to the solenoid of your
lure machine. The purpose for this gadget is to count the solenoid
actuations or in other words...how many time you hit the button. This is
handy for the individual wishing to practice preventative maintenance on their
lure machine. For more info.............................$20.00
200 Amp Solenoid for STD Lure
Machine NEW
This
is a heavy duty solenoid with silver plated contacts which is rated continuous
duty. This is not an automotive type solenoid and is used in various
commercial and industrial applications. Because of this, the base of the
unit does not act as the ground. There are two small posts on the front of
the solenoid and one (it does not matter which) needs to be connected to a
ground and the other post is connected to the switch. For more info
please read............................$27.00
Reversible Lure Machine Solenoid
Double acting solenoid used in the reversing lure machine. When a solenoid failure occurs, it is suggested that both
solenoids be replaced at the same time. Nothing will spoil your
day more than going to the trouble of changing one solenoid and
having the other one fail shortly
thereafter..............................$43.00
Lure Machine Safety
Switch 
A quick and safe way to stop a lure machine when a solenoid
or switch locks up. It also provides positive assurance to the
lure mechanic that the lure machine will not start when they are
working on it. The switch is rated for 750 AMP draw.
Top Mount for connection to neg.(-) top
post battery terminal.
(wt. 1 lb.) ..........................................$29.00
Top Mount switch with 16” cable. (wt. 2 lbs.)...
..$37.00
Battery Cables
Injoy manufactures its own battery and connecting cables in-house using tin
plated solid copper battery lugs and eyelets. Red and black #1 SAE wires
are used to provide the best current flow possible. We will custom
assemble your cabling requirements as shown below.
Standard Battery Cable 16”
long...................$12.00 each
Positive Terminal - large battery lug, red wire & eyelet
with 5/16” hole. Negative Terminal - small battery lug,
black wire & eyelet with 3/8” hole.
Custom Length Cables are $11.00 for the first 16” and $
.35 per inch for each additional inch in
length. You can specify lug and eyelet size and wire color at no
additional charge.
Cables With Eyelets on each end
(16” long)........$8.00 each.......Please specify eyelet size and wire
color. Custom length cables are $8.00 for the first 16” and $ .35 per inch for each additional inch in length.
Products