Pulleys
WHICH
PULLEY SHOULD I CHOOSE?
This question used to be an
easy one . . . there were only two pulleys to choose from . . .a
corner pulley or a hold down pulley! Now, as you will see, there
is a choice to be made as to the type of pulley to be used and a
choice of the materials from which the pulley is constructed. We
are pleased to announce, due to repeated requests, that we have
resumed making the orange UHMW (Ultra high molecular weight
polyethylene) Hold Down pulley with wood bases.
The UHMW pulley and wood base
makes for a practically indestructible unit. UHMW is a highly
abrasion resistant material that is often used in soft faced
hammers and as a lining for log chutes. The hardwood bases are
subject to marking and string burns when the string comes in
contact with them. However, they do resist serious string cuts
that require the base(s) to be replaced. The trade-off is that
they are considerably more expensive.
The red nylon pulleys should
satisfy all but the most demanding field trial conditions. The
main complaint, we at Injoy have heard from our customers, is
that if the string comes in contact with the nylon base of a hold
down or box pulley used as a hold down it can cut though the
nylon to such a degree that the base needs to be replaced. The
nylon bases now have an aluminum wear strip inserted in them
which prevents most of the string cut damage experienced in the
past.
All INJOY pulleys are constructed using a
stainless steel center, two sealed ball bearings and a base with 8” (20.3 cm) spikes for
staking the pulleys to the ground.
Instructions for proper use of the Injoy Pulley.
STD Corner Pulley
These
pulleys are 3” tall (7.6 cm) and are recommended for all field conditions and lure sizes
constructed using white kitchen
trash bags. (wt. 2 lbs.)
Red
Nylon..............$37.00
L/P Corner Pulley
This pulley is 2-1/2” tall (6.4 cm) and is recommended for short
grass conditions and special situations such as oval track
racing.
Red Nylon (wt. 2
lbs.).........................................$36.00
Racing Pulley
(New)
The
Racing Pulley is approx. 1-5/8" tall (4.2 cm) and is intended to be used with a drag (or
take up) system which is often used for oval track racing. This pulley
will not work with a continuous loop system.
Please read before ordering. (wt. 2
lbs.).............................$42.00
HI Corner Pulley
This pulley is the same design as the STD corner pulley
except it is 4” tall (10.2 cm) and allows more room for larger lures.
This design has been requested by Falconers and Greyhound
trainers using large training lures and skins.
Red Nylon only (wt. 2 lbs.)......................$47.00
Hold Down Pulley
These pulleys are designed to be used in a horizontal
position on uneven terrain and are placed over the string to keep
it close to the ground. The overall height is 5” (12.7 cm), with a
lure opening of 3-1/2” X 4” (8.9 X 10.2 cm).
Red nylon pulley with nylon bases (wt. 2
lbs.).................$46.00
Orange UHMW pulley with hardwood plywood bases (wt 3
lbs.)......$70.00
UHMW Pulley with Red Nylon Bases (wt 3 lbs)............$55.00
(not shown)
Box Pulley
A universal style pulley that can be used as a corner or hold
down pulley. The pulley bases have a hole in each of the back
corners so that a spike can be used to retain the string when
used as a corner pulley. This pulley works well as a hold down.
Nylon model only. (wt. 2 lbs.)..............$48.00
Pulley Replacement
Parts
DESCRIPTION...
|
NYLON
|
WOOD
|
Pulley base only
|
$5.00
|
N/A
|
Base with Hinge
|
$7.00
|
N/A
|
Base with screw eyes
|
$6.00
|
$12.00
|
Replacement Bearing
|
$3.00 each
|
|
8" Spikes
|
$10.00/dozen
|
|
The
Racing Pulley is approx. 1-5/8" tall (4.2 cm) and is intended to be used with a drag (or
take up) system which is often used for oval track racing. This pulley
will not work with a continuous loop system.
Please read before ordering. (wt. 2
lbs.).............................$42.00
Products